Direct Activated Valve
1. Pressure Reducing Valve complete set
Module assembly, which means light structure, space-saving, easy installation and maintenance.
Equipped with buffer check valve, unfavorable effect from water impulse can be eliminated.
Simple structure, precise tuning and easy operation.
Module assembly can decrease leakage coming from assembly connections due to long-term vibration.
Adjustment range : 0.5kgf/cm2 ~5kgf/cm2
Applied temperature : -15 ~ 80℃
Test pressure for valve body : 21 kgf/cm2
The inlet pressure gauge indicates pressure before reducing, andoutlet pressure gauge indicates pressure after reducing
When cleaning the impurities on the filter net, just take off the cylinder (component 4), then filter net (component 7) can be unloaded at the same time.
2. Pressure Reducing Valve Stainless Steel 316
- Valve body is made by Stainless Steel #316, suitable for fluid, air and vapor.
- The gate is balanced-pressure designed, which will not influence the outlet pressure caused by unstable inlet pressure.
- When the outlet pressure responds directly to the pressure control chamber and adjusts the setting pressure, it responds quickly and adjusts the pressure accurately.
- Design of piston and diaphragm improves the inability of sustaining pressure and leakage.
- Pressure Adjusting Range：
- 1kgf / cm2～6kgf / cm2
- 4kgf / cm2～10kgf / cm2
- 8kgf / cm2～13kgf / cm2
- Pressure needed from fully-closed gate to fully-opened gate : 1.5 kgf/cm2
- Applied Temperature：
- -15℃～100℃
- -15℃～200℃ (For steam)
- Maximum Applied Pressure: 25 kgf/cm2
3. Pressure Sustaining Valve (Back Pressure Valve)
- The whole set is made by stainless steel #316, and it is suitable for the fluid of pure water, acid & alkaline fluid, vapor or air.
- Back pressure valve can maintain required pressure.
- Design of piston and diaphragm improves the inability of sustaining pressure and leakage.
- Back pressure chamber controls the valve gate and let gate respond, quickly and adjust pressure accurately.
- Pressure Adjusting Range：
- 1 kgf / cm2～5 kgf / cm2
- 4 kgf / cm2～10 kgf / cm2
- Applied Temperature：-15℃～100℃
- Valve Body Testing Pressure：21kgf /cm2
- Pressure gauge indicates the sustaining pressure.
4. Cast Iron / Bronze Pressure Reducing Valve
- The gate is designed for opening status, which will not influence the water supply function under unstable inlet pressure condition.
- When the outlet pressure responds directly to the pressure control chamber and adjust the setting pressure, it responses quickly and adjust the pressure accurately.
Flanged Type Design
- Pressure Adjusting Range：
1 kgf/cm2～5 kgf/cm2
4 kgf/cm2 ～9 kgf/cm2
(special order is needed for other range) - Valve Body Testing Pressure：21kgf/cm2
- Maximum Applied Pressure: 16 kgf/cm2
- Pressure needed from fully-closed gate to fully opened gate: 1 kgf/cm2
- Applied Temperature: -15℃ ~ 80℃
- Applied Fluid: Fresh water
Threaded Type Design
- Applied condition : Water
- Pressure Adjusting Range：
1 kgf/cm2～5 kgf/cm2
4 kgf/cm2 ～9 kgf/cm2 - Valve Body Testing Pressure：21kgf/cm2
- Maximum Applied Pressure：12kgf/cm2
- Applied Temperture：15°C～80°C
5. Air Control Valve
- Pneumatic Valve is utilized by compressed air to control the gate open and close.
- It can be remote controlled and good for non-pressure environment or dirty water.
- The air pressure setting of the air compressor shall be larger or equal to the inner fluid pressure of the pipe.
- Meanwhile, it is utilized with piston and diaphragm which can be against the high pressure and dirt to keep valve’s long life.
- There’s a cleaning opening that is easy for dirt cleaning.
- The installed direction can be either vertical or horizontal.
- Max Working Pressure: 20 kgf/cm2
- Body Testing Pressure: 35 kgf/cm2
- Temperature: -15°C～80°C